| 6EG-EA Flexible Shaft Grinder |
 |
- 2 H.P., 115/230 volt changeover switch, 3450 RPM, 60 Hz., single phase, AC electric motor (P.N. FS113)
- Three Caster swiveling tripod motor mount with carrying handle (P.N. 3927)
- 7 ft. Flexible Shaft, 6 spline (P.N. 32957A)
- 7 ft. Flexible Housing (P.N. 4790A)
- Wet angle head, 6 spline, 1:1 ratio
(P.N. 56961 or 31171C)
- Optional Mounting available: Pedestal Mount, Hanger Bail Mount, Low Caster Base (tripod), Round Base
|
FOR 2 HP 6 SPLINE MACHINES (5FG & 6EG)
Spindles - Fits 6 spline drive shafts. Spindle arbors have standard 5/8" - 11 threaded shaft to accommodate 5/8" threaded insert cup type and 5/8" bushed hole edge type grinding wheels or 3/4" pilot thread to accommodate 3/4" bushed hole cup and edge type grinding wheels. |
| |
Optional Shafts (6 spline) & Housings for 5FG-EA, 6EG-EA, 5FG & 6EG Base Machines |
| 3/4" Thread |
5/8" Thread |
Description |
| 23500 |
56897 |
Straight, Dry, 1:1, 3450 RPM |
| 31161C |
56950 |
Angle, Dry, 1:1, 3450 RPM |
| |
56950A |
Angle, Dry, 2:1, 1725 RPM |
| |
56950B |
Angle, Dry, 4:1, 865 RPM |
| 31171C |
56961 |
Angle, Wet, 1:1, 3450 RPM |
| |
56961A |
Angle, Wet, 2:1, 1725 RPM |
| |
56961B |
Angle, Wet, 4:1, 865 RPM |
| |
57076 |
Cove Base, Dry, 1:1, 3450 RPM |
| |
57077 |
Cove Base, Wet, 1:1, 3450 RPM |
|
| Part # |
Description |
| 32956 |
7/16" Diameter x 6' Long Shaft |
| 32956D |
7/16" Diameter x 7' Long Shaft |
| 32957 |
5/8" Diameter x 6' Long Shaft |
| 32957A |
5/8" Diameter x 7' Long Shaft |
| 32957B |
5/8" Diameter x 10' Long Shaft |
| 4790 |
5/8" I.D. x 6' Flexible Housing |
| 4790A |
5/8" I.D. x 7' Flexible Housing |
| 4790B |
5/8" I.D. x 10' Flexible Housing |
| 4860 |
1/2" I.D. x 6' Flexible Housing |
| 4860A |
1/2" I.D. x 7' Flexible Housing |
|
6EG-EA Product Manual |
6EG-EA Parts List |
6EG-EA PDF |
To Contact Us:
Terrco® Inc.
222 1st Avenue NW - Watertown, SD 57201
Phone: (605) 882-3888 - Fax: (605) 882-0778 - Email: info@terrco.com |
|
