3EG-EA Flexible Shaft Grinder |
 |
- 1 1/2 H.P., 115/230 volt, 3450 RPM, 60 Hz., single phase, AC electric motor (P.N. FS102)
- Three Caster swiveling tripod motor mount with carrying handle (P.N. 3927)
- 7 ft. Flexible housing (P.N. 57143A)
- Wet angle head, 4 spline, 1:1 ratio
(P.N. 56934)
- Optional mountings available: Pedestal Mount, Hanger Bail Mount, Low Caster Base (tripod), Round Base
|
FOR 1 1/2 HP 4 SPLINE MACHINES (3EG-EA)
Spindles - Fits 4 spline drive shafts. Spindle arbors have standard 5/8" - 11 threaded shaft to accommodate 5/8" threaded insert cup type and 5/8" bushed hole edge type grinding wheels or 3/4" pilot thread to accommodate 3/4" bushed hole cup and edge type grinding wheels. |
3/4" Thread |
5/8" Thread |
Spindle Description |
3430W |
56885 |
Cove Base, Wet, 1:1, 3450 RPM |
3430D |
56890 |
Cove Base, Dry, 1:1, 3450 RPM |
23500-S |
56902 |
Straight, Dry, 1:1, 3450 RPM |
30811B |
56930 |
Angle, Dry, 1:1, 3450 RPM |
|
56930A |
Angle, Dry, 2:1, 1725 RPM |
|
56930B |
Angle, Dry, 4:1, 865 RPM |
3115B |
56934 |
Angle. Wet, 1:1, 3450 RPM |
|
56934A |
Angle, Wet, 2:1, 1725 RPM |
|
56923B |
Angle, Wet, 4:1, 865 RPM |
22610B |
56959E |
Angle, Dry, 10:1, 345 RPM |
|
Optional Shafts (4 spline) and Housings for 3EG-EA, 1EG, 3EG Base Machines
Part # |
Description |
32952 |
7/16" Diameter x 6' Long Flexible Shaft |
32952A |
7/16" Diameter x 7' Long Flexible Shaft |
32952B |
7/16" Diameter x 12' Long Flexible Shaft |
57143 |
6' Flexible Housing |
57143A |
7' Flexible Housing |
57143C |
12' Flexible Housing |
|

3EG-EA Product Manual |

3EG-EA Parts List |

3EG-EA PDF |
To Contact Us:
Terrco® Inc.
222 1st Avenue NW - Watertown, SD 57201
Phone: (605) 882-3888 - Fax: (605) 882-0778 - Email: info@terrco.com |
|