webbanner
 
Model 6200

Model 6200
Model 6200 - front Model 6200 - side
HP/KW 40/30
Voltage 460
Phase 3
Drive Variable
Amp Draw 46
Breaker (Amps) 60-80
Stone Holder RPM 400-760
Sweep of Discs 53-1/2" (1359 mm)
Abrasive Pressure 1885 lbs (855 kg)
Width of Machine 55" (1397 mm)
Length of Machine 80" (2032 mm)
Height of Machine 54" (1372 mm)
Net Weight 2300 lbs (1043 kg)
Shipping Weight 2565 lbs (1163 kg)
Power Cord (6-4) 100 ft (30,5 m)
  • Optimal for jobs exceeding 20,000 sq. ft.
  • Propelling System
  • Despite the weight and size the 6200 is easily maneuverable
  • Movable weights for easy single person operation
  • Stainless steel guards with four vac ports
  • Dry setup
  • Handle separates from gear case to allow both handle and gear case to fit through a standard 36" door
  • Ten pocket weights to control grinding pressure
  • Uses plug stone shape, bolt on or speed shift system

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player


6200 Tool Rotation
Opposite rotating head means the operator DOESN'T fight the machine

Production Rates

  • Mastic removal rate of 1,500 sq. ft. per hour
  • Thin-Set removal rates of 2,500 sq. ft. per hour
  • Thin-Mil coatings removal rates of 1,800 sq. ft. per hour
  • Concrete polishing rates of 10,000 sq. ft. per polishing pad per hour (depending on grit)
  • Rough Terrazzo rates of 3,500 sq. ft. per day

Model 6200 with AGGRESSIVE Thick Mil Epoxy and Trowel Down Removal Tooling
 

Model 6200 (Reflection)

DOWNLOADS
6200 Product Manual
Model 6200 Product Manual
6200 Parts List
Model 6200 Parts List
Model 6200 flyer
Model 6200 PDF

To Contact Us:
Terrco® Inc.
222 1st Avenue NW - Watertown, SD 57201
Phone: (605) 882-3888 - Fax: (605) 882-0778 - Email: info@terrco.com