Terrco Logo


MODEL 3100

Model 3100-3
Motor
25 H.P., 3 Phase, 60 Hz, 220/440 Volt
Abrasive Pressure on Discs
Weights up-800 lbs.
Weights down-1090 lbs.
Speed of Discs
60 Hz-2480 S.F.P.M each disc
50 Hz-2066 S.F.P.M each disc
Sweep of Discs
28" x 28"
Width of Machine
29-1/2"
Length of Machine
72 1/4"
Weight of Machine
1425 lbs.
Shipping Weight of Machine
1625 lbs.
Water Tank
20 gallons
Power Cord
100 feet (4-4)- 230 Volt
100 feet (6-4)- 460 Volt

  • Optimal for jobs exceeding
    10,000 sq. ft.
  • Despite the weight and size the 3100 3-P can be easily maneuvered by a single person
  • Movable weights for easy one person operation
  • Four 42 lb. Pocket Weights
  • Magnetic Starter or Variable Speed Drive
  • Mild Steel or Stainless Steel Guards and Water Tanks
  • Wet/Dry Setup
  • Direct Drive, No Belts
SEE TERRCO EQUIPMENT ON YOU TUBE
Production Rates
  • Mastic removal rate of 1000 sq. ft. per hour
  • Thin-Set removal rates of 1500 sq. ft. per hour
  • Thin-Mil coatings removal of 750 sq. ft. per hour
  • Concrete polishing rates of 2,500 sq. ft. per polishing pad
  • Rough Terrazzo rate of 1,500 sq. ft. per day

DownLoads

Model 3100 Operating Manual (PDF)

Model 3100 Parts List (PDF)

Downloads may take a moment to load.

FOR A PRINTABLE VERSION OF THIS PAGE

To Contact Us:
Terrco® Inc.
222 1st Avenue NW - Watertown, SD 57201
Phone: (605) 882-3888 - Fax: (605) 882-0778 - Email: info@terrco.com