webbanner
 
5FG-EA Flexible Shaft Grinder

5FG-EA Flexible Shaft Grinder
  • 2 H.P., 220 or 440 Volt, 3450 RPM, 60 Hz., Three Phase, AC electric motor (P.N. FS117)
  • Three Caster swiveling tripod motor mount with carrying handle (P.N. 3927)
  • 7 ft. Flexible Shaft, 6 spline ( P.N. 32957A)
  • 7 ft. Flexible Housing (P.N. 4790A)
  • Wet angle head, 6 spline, 1:1 ratio, (P.N. 56961 or 31171C)
  • Optional mounts available: Pedestal Mount, Hanger Bail Mount, Low Caster Base (tripod), Round Base

FOR 2 HP 6 SPLINE MACHINES (5FG & 6EG)
Spindles - Fits 6 spline drive shafts. Spindle arbors have standard 5/8" - 11 threaded shaft to accommodate 5/8" threaded insert cup type and 5/8" bushed hole edge type grinding wheels or 3/4" pilot thread to accommodate 3/4" bushed hole cup and edge type grinding wheels.

  Optional Shafts (6 spline) & Housings for 5FG-EA, 6EG-EA, 5FG & 6EG Base Machines
3/4" Thread 5/8" Thread Description
23500 56897 Straight, Dry, 1:1, 3450 RPM
31161C 56950 Angle, Dry, 1:1, 3450 RPM
  56950A Angle, Dry, 2:1, 1725 RPM
  56950B Angle, Dry, 4:1, 865 RPM
31171C 56961 Angle, Wet, 1:1, 3450 RPM
  56961A Angle, Wet, 2:1, 1725 RPM
  56961B Angle, Wet, 4:1, 865 RPM
  57076 Cove Base, Dry, 1:1, 3450 RPM
  57077 Cove Base, Wet, 1:1, 3450 RPM
Part # Description
32956 7/16" Diameter x 6' Long Shaft
32956D 7/16" Diameter x 7' Long Shaft
32957 5/8" Diameter x 6' Long Shaft
32957A 5/8" Diameter x 7' Long Shaft
32957B 5/8" Diameter x 10' Long Shaft
4790 5/8" I.D. x 6' Flexible Housing
4790A 5/8" I.D. x 7' Flexible Housing
4790B 5/8" I.D. x 10' Flexible Housing
4860 1/2" I.D. x 6' Flexible Housing
4860A 1/2" I.D. x 7' Flexible Housing

DOWNLOADS
5FG-EA Product Manual
5FG-EA Product Manual
5FG-EA Parts List
5FG-EA Parts List
5FG-EA PDF
5FG-EA PDF

To Contact Us:
Terrco® Inc.
222 1st Avenue NW - Watertown, SD 57201
Phone: (605) 882-3888 - Fax: (605) 882-0778 - Email: info@terrco.com